Home 9 News 9 5 common boiler problems that could leave your business in the cold

5 common boiler problems that could leave your business in the cold

5 common boiler problems that could leave your business in the cold
3 November 2026

As temperatures across the West Midlands begin to drop, commercial heating systems are placed under increasing demand. For businesses, schools and public buildings, a boiler breakdown during the colder months can cause significant disruption, affecting everything from occupant comfort to day-to-day operations.

Many of these issues can be avoided with appropriate preparation and planned preventative maintenance. However, we often see problems arise when equipment has been left unused over the summer, maintenance has been overlooked or when systems are not configured correctly for winter conditions.

Here are the five most common commercial boiler problems our technicians typically see each year, as well as tips on what businesses can do to prevent them.

 

1. Pipework freezing and bursting

It goes without saying that freezing temperatures present a significant risk to commercial heating systems, especially where pipework is exposed to cold conditions or insulation is inadequate. When water freezes, it expands, sometimes causing pipes to crack or burst. The resulting leaks can damage buildings, interrupt heating and hot water supplies and obviously lead to costly repairs.

Commercial buildings should have appropriate frost protection measures in place to minimise these risks. This includes checking pipework insulation, identifying vulnerable areas and ensuring frost protection controls are operating correctly.

A typical two-stage frost protection system works by monitoring temperatures and responding at predetermined thresholds. At the first stage, the system’s circulation pumps are activated to circulate water through the pipework, helping to prevent localised freezing. If temperatures continue to fall to a second threshold, the boilers are switched on to heat the circulating water above freezing temperatures.

These systems need to be configured and maintained correctly to provide effective protection, and we do recommend getting them checked regularly to identify faults before freezing conditions arrive.

 

2. Equipment failing to start after the summer

Commercial heating equipment that has been sitting idle during the summer months can sometimes fail to start when it is needed again.

In some cases, this happens because routine servicing has been neglected or outstanding repairs and equipment replacements have been postponed. Minor faults that might have been identified during a maintenance visit can develop into more significant problems over time.

Waiting until temperatures drop before testing the system leaves little time to arrange repairs, especially when demand for commercial heating engineers increases.

Businesses should arrange servicing and operational checks ahead of the heating season – this provides an opportunity to identify faults, complete outstanding repairs and confirm that boilers and associated equipment are ready for winter operation.

 

3. Equipment switched off or defects overlooked

During warmer weather, heating systems may even be manually switched off to reduce unnecessary energy consumption. While this can sometimes be appropriate, problems can then arise when equipment is not returned to its correct operating condition.

For example, a boiler or circulation pump may remain switched off, or a fault identified during the previous heating season may have been left unresolved. These oversights can prevent the heating system from operating when temperatures fall, leaving occupants to shiver without adequate heating or hot water.

Before winter, businesses should review the status of their heating plant, check that equipment is enabled as required and ensure any outstanding defects have been addressed. A professional inspection can help confirm that the system is ready for the demands of the coming months.

 

4. Incorrect control settings

Commercial heating systems rely on correctly configured controls to operate efficiently and maintain suitable building temperatures – so naturally, incorrect time schedules, temperature settings or frost protection parameters can affect system performance.

For example, heating may not operate when required, or frost protection may fail to activate at the appropriate temperature. This is where Building management systems (BMS) can really help businesses to monitor and control heating across their premises, but settings need to reflect the building’s requirements and occupancy patterns.

Reviewing control settings before winter helps ensure that heating operates when needed, temperatures remain appropriate and energy is not wasted through unnecessary operation.

 

5. Pumps seized after the summer period

Another surprisingly common issue is with circulation pumps. These play an essential role in commercial heating systems, moving heated water through pipework to deliver warmth throughout a building.

When these pumps remain unused for extended periods, they can become seized and fail to operate when the heating system is restarted. This can prevent water from circulating correctly, affecting heating performance and potentially causing further problems for the system.

Checking pumps as part of pre-winter maintenance helps to ward off any potential issues; our engineers can assess their condition, confirm correct operation and arrange any necessary repairs or replacements.

 

Prepare your commercial heating system for winter

Many common boiler problems can be prevented by taking action before colder weather arrives.

Checking frost protection, reviewing control settings and ensuring that boilers, pumps and associated equipment are operating correctly can help businesses reduce the risk of unexpected breakdowns.

At Lord Combustion, we provide comprehensive commercial heating servicing, maintenance and repair, helping businesses across the West Midlands to maintain reliable and efficient heating systems and above all, keep their staff and visitors toasty warm over winter. 

Get in touch with our team today to discuss your commercial heating maintenance requirements and prepare your building for winter.